How Do You Operate A Crosley Record Player?

With the revolution of Vinyl records, Crosley record players are on the best record players in the market. They have one of the stylish lines of record players, that gives you optimum sound quality with high fidelity. You can look at these products on crosley webpage as well.

There is a wide variety of Crosley record players that you can choose from and they all work slightly different from each other. Depending on your model, its configuration, and if it is automatic, semi-automatic, or manual the operating process could differ.

There are a few basic steps that are common with a record player’s functioning.

  • As there are dust covers on most of the turntables you should remove them in the first place. These dust covers are used to keep all the components of the record player clean. There is a dust cover on the platter as well so make sure that you remove it as well.

  • As some of the turntables start spinning as soon as the stylus drops make sure that the platter is not spinning and the needle is up as you power on your turntable. This is to ensure that any of the components do not get damaged.

  • As you are done with the basics, you can now place the vinyl record on the player. You have to place the record on the platter and lower the stylus onto the record. As you place the record make sure that you are holding the record from the edges. Do not touch the grooves as they can damage the record’s quality.

  • Control configurations will differ with the model of the turntable. Almost, every turntable comes with a switch that is going to allow you to start or stop the motor that is driving the platter. There are speed variations with different modes that can be adjusted according to your requirements. With automatic turntables, you would not have to deal with all the fuss as the moment of the stylus will be automatic.

  • Then comes the process of lifting tonearm from its resting position. This whole process is known as cueing. There are different variations that are there with turntables that use a lever to raise and lower the arm.

  • With this, you are halfway through the process of starting your turntable. As you begin listening to your records you should keep all these points in your mind.

  • Now as you are done with your record you can stop the turntable by lifting up the stylus from the record and placing it on its designated place.

All these are the basic steps that you can follow in order to take start your Crosley turntable. Besides all this, there are several other features that are there in the newer models of turntables that you should know about in order to upgrade and maintain your turntable.

  • You can increase the sound of your turntable with the help of receivers which in turn can be connected with speakers.

  • Attaching all the cables is really important in your turntable, this will ensure that you get the best sounds without damaging your turntable or your record.

  • Correct input is also important in order to enhance your listening experience.

Lastly, you should keep your records and your turntable clean to increase its life.

Julia

Julia

Julia Arostegi lives in California USA. She took Developmental Communication at the University of California and finished her studies in 2012. She is currently the managing director of California Magazine. She is also a blogger, content enthusiast and a photographer.